For example, patio gardens that have pots under overhangs and roofs may not receive water when it rains and will continue to need to be watered during periods of rain. To program sensor override: RUN. 1. Turn the dial to the . RUN. position. 2. Press and hold the button down while turning the dial to . START TIMES. position. 3. Release the button.
All you need to do is clean the discs and ensure that the switch is working perfectly. That will eliminate the issue with the Hunter wireless rain sensor not turning off after it has rained for a few hours. Spindle Problems. Some users have also mentioned that the spindle attached to the switch gets stuck in one position, and the rain sensors
Installing the WI-FI Module. Insert the WAND module into the right-side accessory port of the X2 ™ controller. When installed, WAND disables the X2 controller’s dial and button functions as well as the existing schedule and settings. All programming is then managed via Hydrawise ™ cloud-based software from a smartphone or desktop browser.
Find the latest prices and specifications for Hunter replacement parts, including check valve assemblies, riser seals, and diaphragms, in this PDF document.
EVF confirms I'm in Aperture Priority. And if I set EC to C and press in the front command, the dial does adjust EC. So it seems it's just the aperture adjustment I can't get to work. And yes: in Menu, I went to wrench/spanner, selected Button/Dial Setting/Command Dial Setting, and set "1" (F) to Aperture.
go out. I have had a Hunter X-Core with the (wireless) rain sensor working for a while. I recently had to reprogramm/change some of the schedules and all of a sudden, when in "Run" mode the controller ALWAYS shows "Off" and indicates the Umbrella (rain sensor). My issue is that i cannot get the X-Core to run normally anymore, unless
. 56 286 9 179 182 34 23 359 326
hunter x core dial not working
